Click image to view full size image
Description:
1, Vacuum system and transmission system of Germany.2, Servo drive system of Japan.
3, Multi-spindle processing.
Functionand features:
1,This machine structure optimize the design, which issuitable for processing of diversified and complexproducts.
2, It was widely usedin engraving, punching, carving, side washing andguide margin
etc. It wasmainly usedin carving and wisp of milling.
3,The machine parts are the top products in the country.
4,Vacuum system andtransmission system of Germany, Servo drive system ofJapan.
5,The spindle with originalpackaging was imported from Italy.
6,It adopts a multi-spindleprocessing and cutting arbitrarily, PC industry combined with toolchange system, repeat amount of heavyprocessing.
7,The machine transmission withdual axis and bilateral belongs to the type ofheavy cutting processing.
8,It has the table with vacuumsuction, the processing do not need to be sawcutting more, then can be online cutting, also can be omitted themould making.
9,The processing speed can beup to 15m per minute.
Newfunctions:
Thefunction of gang drill of this CNC cutting machine ismainly used in vertical planeand side view punching, it’s more efficiency andconvenience than the spindle drilling, reduced the procedure oftool change, filled the defects of the side processing.
This CNC machinecenters is suitable theprocessing of diversified and complex products,which is mainly used in cutting and punching and other aspects likecarving, side washing, guide margin etc.
Application:
This machine issuitable for all kinds offurniture processing such as solid wood furniture, solid wood door,decoration materials, cabinet door, computer desk,mahjong table, panel furniture, office furniture, wood speaker box,wood kitchenware etc.
Italso can be used for processing in non-metal mould area and auto mouldindustry.
Parameters:
Description | Parameter | Others | |
Workingroute | X axisworking route | 1500mm | Less than2000mm |
Y axisworking route | 5000mm | Less than1200 mm | |
Z axisworking route | 380mm | Less than1200mm | |
WorkingTable | 1600x6000mm |
| |
Processingaccuracy | 0.02mm |
| |
structure | Tablestructure | Vacuumsuction (bakelite) |
|
X, Y axisstructure | Gear andrack | importedfrom Germany | |
Z axisstructure | Ballscrew | ||
speed | Max.Speed | 36000mm/min |
|
Max. workingspeed | 15000mm/min |
| |
Spindle | Spindlepower | 8.0Kw*2 |
|
Max. spindlespeed | 0-24000r/min |
| |
Drivemotors | Servo | importedfrom Italy | |
WorkingVoltage | AC380V/50HZ |
| |
CommandCode | Gcode |
| |
OperatingSystem | Industry PCSystem (Windows System) |
| |
Netweight | 5600Kg |
| |
GrossWeight | 6300Kg |
| |
Photo:
speed SK-1325 woodworking router
